5 Reasons Construction Jobsites are Going Electric



ElectricElectrification of construction machinery is hardly a new concept. For years, electric equipment has been commonly seen in a variety of applications, from demolition and mining to aerial lift and industrial work.

Now, however, electric equipment is becoming increasingly prevalent on and around jobsites. Its potential is evident. Its benefits are clear. Its long-term place in the industry is no longer up for debate. And, as electric vehicles continue to be more widely adopted by consumers, all that’s left to do is examine – and try to accurately determine –how the construction industry should prepare for the technology to become fully mainstream in the not-too-distant future.

“If you go out about three years, there will be approximately 700 different types of electric vehicles roadside, and that’s not even getting into construction and agriculture,” said David Knight, CEO of Terbine, a provider of technology for the seamless exchanging of IoT data between the mobility and energy sectors, who spoke on how the construction industry should prepare for the widespread adoption of electric vehicles in the not-too-distant future at CONEXPO-CON/AGG 2023.

CONEXPO-CON/AGG and the International Fluid Power Exposition (IFPE) educational sessions are now available on AEM’s on-demand platform. Gain access to more than 175 recordings of the educational sessions presented at the shows -- featuring expert opinions and perspectives from contractors, certified trainers, technology solutions providers and OEMs. Learn more.

According to Knight, there are five main reasons why equipment end users in the construction industry are strongly considering investing (or already have invested) in electric machinery. They are:

  • Lower operating costs – The savings on diesel costs, alone, are significant. Most OEMs cite a range of four to eight hours of runtime for “average” use on electric compact equipment, with an eight-hour overnight charge. And while it’s quick and easy to compare run times on a fully charged electric machine with a full tank on diesel units, there’s no idle on an electric machine. Therefore, an operator can get a day or more of productive work out of it because they’re typically not running a machine for eight continuous hours a day.
  • Lower maintenance costs –.Reciprocating engines possess many friction-generating parts, which fail. The friction, and the frictional components and amount of heat generated with an engine running is really what contributes to parts being replaced and maintained.
  • Federal and state tax credits Incentives can offer savings in the tens of thousands, or even hundreds of thousands, across a single fleet. Because they change all the time, it’s important for organizations to stay up to date regarding what’s available, both regionally and nationally.
  • Carbon credits and offsets – Carbon credits, also known as carbon allowances, work like permission slips for emissions. When a company buys a carbon credit, usually from the government, they gain permission to generate one ton of CO2 emissions. When one company removes a unit of carbon from the atmosphere as part of their normal business activity, they can generate a carbon offset. Other companies can then purchase that carbon offset to reduce their own carbon footprint.
  • ESG goals -- Many organizations are setting and working toward Environmental, Social and Corporate Governance (ESG) goals, and it’s a trend that’s only expected to become more common with time. Without goals and corresponding policies, organizations face ESG risk, which includes loss of investors, a damaged reputation and fines for regulatory noncompliance.

There is every reason to believe the electric vehicles and electric equipment will continue to develop and improve over time, said Knight, thus making a greater level of adoption even more likely in the very near future. According to the Terbine CEO, the architectures of electric vehicles are going to even higher voltages. The higher the voltage, he explained, the less current is needed for a given amount of wattage. That also means less heat. And, while voltages are very good now, they are expected to improve significantly in the coming years.

“They’re going to be really good in three to five years, and that’s going to allow for even faster and more efficient charging than ever before,” he added.

Want to learn more about electric vehicle adoption in the construction industry and other informative topics? The CONEXPO-CON/AGG and IFPE education on-demand platform has it all. For more information on opportunities related to show education content, contact AEM’s Lexy Frechette at lfrechette@aem.org.

For more AEM news and updates, subscribe to the AEM Industry Advisor.

AEM Updates, Construction, Mining & Utility

For more AEM news and updates, subscribe to the AEM Industry Advisor.

Related Articles

Equipment is Key to Carbon Neutrality in the Beef, Dairy Industries

By Gregg Wartgow, Special to AEM —The beef and dairy industries have outlined comprehensive plans to achieve net zero over the next few decades. Accomplishing that objective...

Q2 Ag and Construction Market Outlook: Running Out of Optimism as Demand Slows Down

The short-term outlooks for equipment manufacturing and the agriculture and construction customers they serve remain somewhat uncertain, but slow growth is on the horizon...

Balanced Engineering’s Rick Weires Weighs in on the Value of Functional Safety

There’s no overstating the importance of keeping functional safety in mind when designing and launching innovative and cutting-edge products. With that in mind, AEM member...

PFAS Reporting and Recordkeeping Requirements: What Equipment Manufacturers Need to Know

"It’s all about managing risk. We need to be ready with robust compliance programs, because there is legislation coming and the potential for more litigation in the future. You...

New Look, Same Awesome Advocacy from the I Make America Campaign

If you’ve been watching I Make America’s social media channels, you may have seen a teaser for our newest efforts to showcase the power and influence of U.S. equipment...

View all AEM Updates